| | |
GV1 Ref: 58
Price: £99.99 (£117.49 Including VAT at 17.5%)
|
|
Futaba GV1 Governor
|
 |
CSM0050 : CSM CARBSMART Ref: 3207
This item is set to be an essential accessory to anybody using a glow engine in their helicopter. It automatically controls the fuel mixture (Via an extra servo/Not included) by monitoring the cylinder head temperature. This therefore simplifies mixture adjustment, protects the engine against a lean run & also make mixture less critical to weather changes. All of this together will allow higher, more consistent, power output.
Please note: the Smart Carb supply must not be plugged into the battery/DSC port on your RX, please us a spare channel or Y-lead
Price: £25.52 (£29.99 Including VAT at 17.5%)
|  |
|
|
CSMRL10 : RevLock Governor System Ref: 3209
Revlock does not just govern or limit the RPM but accurately locks the engine to a digitally synthasised referance signal for unrivalled precision. Smooth in hovering conditions but capable of unmatched responsivity to deliver optimum use of the available engine power throughout aggressive 3D flight.
Price: £34.74 (£40.82 Including VAT at 17.5%)
|  |
|
|
CSMRL20 : Revlock 20 Governor System Ref: 3208
New version of the CSM Revlock which now includes an engine limiter mode as well as the governor mode. This is also now programmable from your PC with the optional USB Interface.
Price: £43.43 (£51.03 Including VAT at 17.5%)
|  |
|
|
CSMRL40 : Revlock 40 Governor System -- Advanced G-Sensitive Collective Management. Ref: 82
Now there is no need to compromise your set-up between high-g capability and ultimate climb and flight speeds. RL40 intelligently applies collective management to give you the best of both worlds.
Like its predecessor, the RL30, this governor will, when needed, limit the amount of collective pitch available to prevent excessive loss of head-speed in high-g manoeuvres. However, RL40 goes one stage further, and by incorporating an accelerometer is able to recognize low-g flight situations such as fast forward flight and vertical climbs where greater performance can be obtained by allowing more collective pitch to be employed even where this results in some loss of head speed.
It also greatly simplifies the set-up and installation by removing the need for careful pitch range adjustment.
Price: £57.38 (£67.42 Including VAT at 17.5%)
|  |
|
|
CSMRL30 : Revlock 30 Governor with Collective Management Ref: 3210
Revlock 30 is the latest engine governor form CSM, this unit has built in pitch management, to help stop the head from bogging in certain manoeuvres. The amount of pitch to be removed, as well as the other parameters are all programmable via the CSM USB interface.
Price: £51.02 (£59.95 Including VAT at 17.5%)
|  |
|
|
CSMRL30C : CSM CYCLOCK + REVLOCK 30 DEAL Ref: 3251
Same as above but bundled with the Revlock 30 making it ideal for CCPM helicopters
Price: £75.74 (£88.99 Including VAT at 17.5%)
|  |
|
|
CSMRL11 : Magnet for RevLock (1) Ref: 3211
Price: £1.69 (£1.99 Including VAT at 17.5%)
|
|
|
CSMRL16 : Brass Counter Weight - Revlock (1) Ref: 3212
Price: £1.69 (£1.99 Including VAT at 17.5%)
|
|
|
TJ Rev Max Ref: 903
A New Approach to Head Speed ControlSet up your curves as you like them and let Rev Max control the unwanted overspeed around zero pitch.Maximum engine power always available when you need it.Endorsd by top American 3D flyer Alan Szabo Jnr. and US F3C team pilot Len Sabato.Suitable for 3D, F3C and sport flying.
Price: £52.13 (£61.25 Including VAT at 17.5%)
|  |
|
|
Throttle Jockey Pro Ref: 163
New FeaturesAdvanced Digital Control AlgorithmNEW - Selectable Super Servo SupportNEW - Set the Target RPM from your transmitter or by an on-board PotHigh Resolution Pulse and generation systemLow PowerSmall and LightweightNEW - Fail-out feature on low battery conditions - Governing ceases on a low battery condition, passing control back to the receiver
Price: £52.13 (£61.25 Including VAT at 17.5%)
|  |
|
|
P-GV-1 : Futaba GV-1 Governor Ref: 3213
Price: £99.96 (£117.45 Including VAT at 17.5%)
|  |
|
|
P-GV-1 SENS Ref: 1633
Price: £26.04 (£30.60 Including VAT at 17.5%)
|
|
Sensor for GVI
|
|
HE50H09 : Align RCE-G600 Governor Ref: 3372
Engine Governor for use on almost all Glow Models with the ability to fit the sensor magnets to the cooling fan. Compact design, easy use, simple setting with great speed control performance. Speed resolution: 0.1RPM. Speed stability accuracy: within 1%(Steady State). Not compatible with Futaba S9251/S9256 and other 760µs servos
Price: £34.77 (£40.85 Including VAT at 17.5%)
|  |
|
